Đồng hồ đo áp suất Wise Control Việt Nam
Tính năng các dòng PT840, P840, P753S, P752S Wise Control
Dòng P840 Wise Control được thiết kế đặc biệt cho hệ thống phân phối khí tinh khiết cực cao được sử dụng trong ngành công nghiệp bán dẫn, điện tử, y tế, công nghệ sinh học và dược phẩm.
Thông số kỹ thuật PT840, P840, P753S, P752S Wise Control
| Nominal diameter |
50 mm (2″) |
| Switch point accuracy |
±2.0 % of full scale |
| Scale range |
0 ~ 28 MPa |
| Working pressure |
Steady pressure : 75 % of full scale value
Fluctuating pressure : 67 % of full scale value |
| Working temperature |
Ambient : -20 ~ 65 °C
Fluid : Max. 100 °C |
| Temperature effect |
Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
±0.4 % per 10 ℃ of full scale |
Standard features
Mechanical
| Pressure connection |
Type 316L SS electropolished low mount or center back mount
surface finish Ra≤0.25 ㎛
■ ¼” NPT male thread
■ VCR® male or female face seal fitting |
| Element |
Type 316L SS
<6 MPa : C-type bourdon tube
≥6 MPa : Helical type bourdon tube |
| Case |
Type 304SS, Electropolished with pressure relief |
| Cover and window |
Twist-lock polycarbonate |
| Movement |
Stainless steel |
| Pointer |
Black painted aluminium alloy |
| Dial |
White PVC, with pointer stop pin
With black/red lettering, dual pressure scale (bar) |
| Helium leak rate |
Tested to confirm leakage rates of less than
10 -9 mbar • ℓ/sec |
Standard features
Electrical
| Connection |
26 AWG, PVC
6 feet (2 m) |
| Maximum switching current |
0.5 amps AC/DC noninductive load |
| Maximum power |
10 W/DC, 12 VA/AC |
| Maximum switching voltage |
28 V AC/DC |
PT840, P840, P753S, P752S Wise Control- đồng hồ đo áp suất Wise Control Việt Nam
Đánh giá
Chưa có đánh giá nào.