Cảm biến siêu âm USA-S3MAN takex | Takex Việt Nam
Ultrasonic displacement sensors USA-S3MAN takex

Rating/Performance/Specification
| Detecting distance | 0.4 – 3m |
|---|---|
| Detection object | 300x300mm (sample object: 2mm thick aluminum plate) |
| Power supply | 12 – 24VDC ±10% / Ripple (p-p) 10% or less. |
| Power consumption | 1.3W or less (current consumption: Approx.110mA or less (DC12V), Approx. 55mA (DC24V)) |
| Response speed (standalone use) | 300ms or less |
| Output mode | Analog: 4-20mA current output(applicable load:0-250Ω) for voltage output see *3 |
| Minimum resolution *1 | 2.6mm (0.1%F.S.) |
| Linearity | ± 1% F.S. |
| Temperature characteristics | ± 1% of F.S. or less. with reference to output at 23 C between -10 and +55 C (±0.03% of F.S./ C or less) |
| Ultrasonic frequency | Approx. 110 kHz |
| Indicator | RUN: (green) 4mA: (red) mid (orange) 20mA (green) |
| Teaching system | Teaching: distance setting, output inversion (with SET button) |
| Connection | Connector (M12) *2 |
| Weight | Approx. 300 g |
| Protective feature | Output short circuit protection, power supply output protection against reverse connection |
| Auxiliary function | Anti interference, temperature correction |
| Material | Case: Brass (nickel plated) Detection Side: nylon, silicon, glass epoxy |
| Accessories | Operation manual, voltage conversion resistance (250Ω),wave washers, nuts (Note :Cord with connector separately available) |
Environmental Specification
|
Ambient temperature |
-10 – +55 C (strage:-20 – +65C) (non-freezing) |
|
Ambient humidity |
35 – 85%RH (non-condensing) |
|
Ambient wind speed |
1 m/s or less |
|
Protective structure |
IP67 (no drops of water allowed on head) |
|
Vibration |
10 – 55 Hz / 1.5 mm double amplitude / 2 hours each in 3 directions |
|
Shock |
500 m/s2 / 3 times each in 3 directions (ultrasonic element excluded) |
|
Dielectric withstanding |
1000VAC 50/60Hz for 1 minute |
|
Insulation resistance |
500 VDC, 50 MΩ or higher |


Đánh giá
Chưa có đánh giá nào.