Chi tiết sản phẩm
Đồng hồ đo độ cứng cao su GS709N, GS-709G Teclock Việt Nam
This standard is prescribed by plastic industry in Japan apart from testing method of hardness of rubber. This is basically equal to Durometer of JIS K 6253, as only its round up method of spring load value etc. is different. But we distinguish model name as another Durometer according to the view of conformity to standard.
Specifications
GS-702N Type D Durometer Plastics
Hard rubber
GS-709N Type A Duromet General rubber
Soft plastic
GS-709P Type A Durometer Peak pointer type
Pocket type
Model |
Type |
Application / Materials |
Conform Standards |
Spring Load Value0-100 |
Indentor Shape(mm) |
IndentorHeight(mm) |
Weight(g) |
|
Analog |
GS-702N |
Type D |
Plastics / Hard rubber |
JIS K 7215ISO 868ASTM D 2240 |
0-44483mN(0-4536gf) |
Conical Cone of R0.1with 35° angle |
2.50 |
200 |
GS-702G |
Type D (Peak pointer type) |
Plastics / Hard rubber |
0-44483mN(0-4536gf) |
Conical Cone of R0.1with 35° angle |
2.50 |
208 |
||
GS-709N |
Type A |
Soft plastic / General rubber |
549-8061mN(56-822gf) |
Truncated Cone of φ 0.79with 35° angle |
2.50 |
200 |
||
GS-709G |
Type A (Peak pointer type) |
Soft plastic / General rubber |
549-8061mN(56-822gf) |
Truncated Cone of φ 0.79with 35° angle |
2.50 |
208 |
||
GS-709P |
Type A (Pocket type) |
Soft plastic / General rubber |
JIS K 7215 |
550-8050mN(56.1-821.1gf) |
Truncated Cone of φ 0.79with 35° angle |
2.50 |
125 |
|
Digital |
GSD-719K |
Type A |
Soft plastic / General rubber |
JIS K 6253, JIS K 7215, ISO7619, ISO 868, ASTM D 2240 |
549-8061mN(55-822gf) |
Truncated Cone of φ 0.79with 35° angle |
2.50 |
313 |
GSD-720K |
Type D |
Plastics / Hard rubber |
0-44450mN(0-4533gf) |
Conical Cone of R0.1with 35° angle |
||||


Đánh giá
Chưa có đánh giá nào.